We are now selling template curves on super thick 250gsm cardboard, which can be used as a template ( no need for mdf) Will be up online very soon buy one buy ten The more you buy the cheaper they will be.
This is a Medium Flex Speed File with a velcro backing as shown in the videos by @rousasurfboards demonstrating just as how good they are. We sell all grades of sandpaper for them aswell. For $39.99 you would stop using your medium and hard blocks on some of your stages in shaping. Check them online […]
75 each all colours. We are a high volume Distributor for Surf hardware for all manufacturing supplies. Dont be fooled and pay more on other sites. If your account is on hold buy from us if you don’t have an account buy from us. We support backyarders, board repairers and alien’s Buy at www.thesurfboardstudio.com.au or […]
The best thing about todays private glassing course was seeing the froth in Kane’s head how he changed his colours and thoughts about 6 times before coming back around to his original design. The passion in this young fella today made me think back to when I was his age, wanting to use all the […]
Big respect to Paul booking his son Kane ( on next post) and himself into a 2 on one shaping and glassing with Rousa shaping and myself glassing. And yes this gentleman actually made a log for his daughter not himself in the course. Came out amazing Paul great Sunday mate.
Have a look at his first board it should be sitting on the rack at a surf shop. Made a shorty for himself with a orange tinted cutlap with a black pinline. Amazing finish mate a big well done on this one yew🤙
I have owned this truck for the last 7 years. It has been an amazing rig. I put a new starter motor and radiator in it 5 months ago, new batteries 4 weeks ago. It is on gas and petrol, l mainly drive it on petrol. It has Micky Thomson 36′ all terrians on it […]
We are already booked out for the first 3 months so if your keen get your shit together and book today. Private shaping and glassing course are getting book weekly. We do one on one and group courses as private so get yourself and a mate or you and your kid in to experience the […]
Our aps3000 is running like it should we are loaded with blanks and are cutting 2 days a week. We have over 200 files ranging from Mals to Hp short boards. Quick Turnaround on single cuts. Email us at firstname.lastname@example.org send your own files or use ours your choice. Holding over 150 blanks at all […]
These bad boys cut all types of composites from Fibreglass, carbon and kevlar. No more wankers cramps when using scissors on you 9’6 mal. These cutters are amazing once you use them it’s hard to go back to scissors. Super clean cuts in seconds.
A massive thankyou to our in-house shapers @4dsurfboards @rousasurfboards and special guest KR for coming to Melbourne to show their way of shaping. 2019 at the Studio will be a massive year. Bookings are up online and already February is sold out. Due to demand, we are offering private courses from one-on-one to groups of […]
https://www.zaksurfboards.com/wp-content/uploads/2018/11/46029293_116999872645513_2073726989823303262_n.mp4 https://www.zaksurfboards.com/wp-content/uploads/2018/11/46786488_358053224752739_2687132346311155431_n.mp4 https://www.zaksurfboards.com/wp-content/uploads/2018/11/46269700_378204542923401_4146608259190582091_n.mp4 https://www.zaksurfboards.com/wp-content/uploads/2018/11/46246981_201923650697445_4805260219128323821_n.mp4 Here is a few pics of Rousa showing him the way.
https://www.zaksurfboards.com/wp-content/uploads/2018/11/46255891_331472694251186_8392863176571297221_n.mp4 https://www.zaksurfboards.com/wp-content/uploads/2018/11/45833552_156734161961179_8092758543664253372_n.mp4 https://www.zaksurfboards.com/wp-content/uploads/2018/11/46554789_2143376839324498_6903069295148139100_n.mp4 https://www.zaksurfboards.com/wp-content/uploads/2018/11/46302446_295083807776210_6641033347590975804_n.mp4 Rousa has come down from the Westcoast to give the crew 45 years of knowledge in the shaping. And tomorrow he will be running a one on one handshape course starting with the planer.
https://www.zaksurfboards.com/wp-content/uploads/2018/11/45671943_615962448818391_2003497171714065872_n.mp4 For a few extra bucks you can enjoy 2 full days in the bay shaping, glassing and sanding to complete and take home a sled. Here is a few pics of Michael all the way from Byron Bay enjoying 2 days of learning the craft. Cutting out the skinning of the blank with a […]
https://www.zaksurfboards.com/wp-content/uploads/2018/11/45195395_1058223364355319_8381574589921940838_n.mp4 https://www.zaksurfboards.com/wp-content/uploads/2018/11/45177403_251430165730504_6569235585020211071_n.mp4 The rectangle and round blocks are amazing for all stages of shaping. Today l have been using them for rail bevels, cleaning up decks and bottoms. It’s amazing what these tools can do. A must for all shapers, even the man himself @vulcansurf gives Dura-Block the thumbs up #dura-block
They are the best in the panel industry and we have been experimenting with them at the Studio after KR bought one with him on the last Shaping course. These are a must for all Shapers. They are rigid and have flex when needed. They come in a massive range of shapes and sizes. Velcro […]
https://www.zaksurfboards.com/wp-content/uploads/2018/10/44646756_1004400359744871_8859998270497471749_n.mp4 https://www.zaksurfboards.com/wp-content/uploads/2018/10/44672560_1895963573832277_4575323383384691840_n.mp4 Material inlays, Hawaiian guns to tints and pinlines. Just wait and see the finished products in the 10 hours they were in the studio.
https://www.zaksurfboards.com/wp-content/uploads/2018/10/44126437_687542778297695_1075819023426572003_n.mp4 https://www.zaksurfboards.com/wp-content/uploads/2018/10/44540061_294952831109414_8993185958596623088_n.mp4 We had 5 students shaping a mix bag of sleds. Had a 7’0 Hawaiian gun down to a 5’6 fish. Here is a few pics of the students marking and cutting out there templates.
https://www.zaksurfboards.com/wp-content/uploads/2018/09/42248834_302200507043326_7292858590581551755_n.mp4 9’6 long 50/50 rail, volan magenta cut lap and finish coat all in 9 hours. It was hell but we got him out before 5.
https://www.zaksurfboards.com/wp-content/uploads/2018/09/40877423_227917448074602_6268206235189278935_n.mp4 This tool is the best l have used for marking and cutting laps on surfboards. There is plenty which we have all designed over the years but this 3d printed tool takes the cake.